Code: BM-BMMK4

The MDI Breath Alert respiration monitor is robust, reliable and simple to operate.

• Audible beep and light with each breath
• Continuously detects breathing during anaesthesia
• Alarms if breathing absent

• Large Digital Display (2 digits)
• Alarm system for no breath and low battery
• Apnoea settings for 5 to 30 seconds
• Automatically sets to the last used apnoea time
• Incorporates:
  • Alarm and Charging multifunction lights
  • Pause button to reset apnoea time: screen flashes. Alarm is silenced but breathing beep continues
  • Select button to set required apnoea time
  • Mute button. Cancels the beep during breathing. Breath light and Alarm system remain active.
  • Volume and Sensitivity controls
  • Alarm reset optical sensor
  • Preset apnoea time is counted up. If apnoea time is exceeded alarm is activated
  • Built-in automatic charging circuit-stops charging when battery is full
  • Long battery life

• Dimensions: 129mm (W) x 38mm (H) x 133mm (D)
• Weight: 0.38Kg (including battery)
• Power Input: 9V DC @ 300mA. 2.5mm plug positive (+) central pin
• Battery: 4 x AA NiMH cells (Fully charged Duration up to 120 hours – depending on quality and condition of the AA cells)
• Apnoea times: 5, 10, 15, 20, 25 or 30 seconds
• Sensor: Heat sensitive
• Sensor lead: 2m, plugs into rear panel
• Warranty: 12 months

Spare Parts Available:

• Code: BM-SENSOR-00 Sensor Lead
• Code: BM-MK4-POWAU Power Pack (Australian)